Mold Removal in Fairway Springs, FL
Fairway Springs is a homeowners-association community off State Road 54 in the Seven Springs area of New Port Richey, built in the early to mid-1980s with a clubhouse and pool. The houses are single-family block on slabs from that decade, with the air handler in the garage or a hall closet and a shallow attic of flex duct above a shingle roof that, in most cases, has been replaced at least once.
It is inland and stayed dry in Idalia and Helene, and the Anclote River is far enough away that Milton's rain was a yard problem, not a house problem. Mold here comes from a 1980s house doing 1980s things: a sliding door that leaks at the track, a bathroom fan vented into the attic, a water heater in the garage that let go, or an air conditioner replaced with one too big for the house.
Homeowners in Fairway Springs reach an independent local mold provider through this site's phone line. The provider reads the house and explains what it needs. The site sets up the call.
Fairway Springs mold removal, in the 1980s block homes
A soft closet wall on the other side of a garage water heater is mold removal, and the crew meters the bottom plate before cutting. A gray ring on a bathroom ceiling is bathroom mold removal, with the fan ducted outside afterward. Once the wall reads dry, mold damage repair puts the drywall and trim back.
County permits and the architectural committee in Fairway Springs
Fairway Springs is in unincorporated Pasco County, so permits for the rebuild go through the county, and the association's architectural committee reviews exterior work such as roofing and paint.
Call (727) 353-1690 and tell us what you see. We put you through to a local mold provider serving Fairway Springs.
Services Available in Fairway Springs
Mold Removal
Containment, negative air, and removal of wet drywall, baseboard, and insulation, then HEPA cleaning and drying down to the block.
Black Mold Removal
Dark growth handled by extent and moisture, not color: sealed room, porous material out, hard surfaces cleaned, source fixed.
Whole-Home Mold Remediation
A house that took surge water or sat closed all summer, mapped room by room, contained in zones, and cleared as one project.
Attic Mold Remediation
Growth on roof decking and trusses above a leak or a sweating duct, cleaned and treated with the roof or venting problem addressed.
HVAC Mold Cleaning
Coil, drain pan, condensate line, cabinet, and ducts cleaned or replaced when the musty smell rides in on the air handler.
Mold Odor Removal
Tracking a musty smell that outlasted the cleanup to the wet material behind it, removing that, then treating the air and surfaces.
Bathroom Mold Removal
Growth behind a vanity, under a tub, or in a ceiling that never dries, removed with the leak or the exhaust problem fixed first.
Mold Damage Repair
Drywall, trim, cabinet bottoms, and flooring put back after removal, only once the slab and block read dry and the source is fixed.